ADLINK GW-01 is compatible with PLC industrial IoT gateway

Basic Information

Product Model: GW-01 PLC Interworking IIoT Industrial Gateway

Product positioning: Lightweight fanless industrial protocol conversion, device data acquisition gateway, relying on iM Connect web configuration software to achieve cloud migration of various PLC device data, targeting intelligent manufacturing and industrial networking scenarios

Core Highlights

Compatible with over 300 mainstream PLC devices, covering mainstream brands such as Omron, Mitsubishi, Siemens, etc;

Supports three standard cloud integration protocols: OPC UA, MQTT, and RESTful API, seamlessly integrating with industrial cloud platforms;

The whole machine is equipped with fully isolated communication interfaces, PCB with three anti coatings, and a wide temperature fanless industrial reinforcement design;

Equipped with iM Connect visualization configuration software on the web side, protocol conversion and configuration can be completed without complex programming.

Hardware system specifications

1. Computing core

CPU: TI Sitara AM3352, ARM Cortex-A8 1GHz processor

Memory: Standard 512MB SDRAM, optional 1GB expansion

Local storage: Standard 4GB eMMC flash memory, optional 8GB

Heat dissipation: Fanless silent industrial heat dissipation solution for the whole machine

Bottom System: Linux Kernel 3.14 Embedded System

2. I/O interface resources

Serial COM (2 isolated communication ports in total): 1 RS232+1 switchable RS422/RS485;

Ethernet port LAN: Dual 10/100Mbps adaptive Ethernet;

Peripheral: USB Host interface;

Power supply terminal: 3-pin isolated power supply terminal.

3. Power supply specifications

Input voltage: 19.2V~28.8V isolated DC power supply;

The whole machine is equipped with status LED indicator lights.

4. Mechanical structure

Body material: SECC galvanized metal chassis, industrial anti-interference;

Size: 120 × 85.45 × 31.25 mm;

Net weight: 0.45kg;

Installation method: Standard 25mm DIN rail buckle installation.

5. Standard factory accessories

Equipment installation manual;

25mm DIN rail buckle;

2 M3 × 6 flat head screws;

System recovery USB drive (for firmware repair/reinstallation).

Environment and Electromagnetic Protection

temperature

Working temperature: -20 ℃~+70 ℃

Storage temperature: -20 ℃~+80 ℃

Humidity: 10%~90% RH at 40 ℃, no condensation

ESD electrostatic protection: contact discharge 4kV, air discharge 8kV

PCB process: The whole circuit board is coated with three anti coatings, including dust, moisture, and corrosion

Certification standards

Passed CE and FCC A-class industrial equipment certification, compliant with electromagnetic compatibility standards:

EN 61000-6-4、EN 61000-6-2、EN55032、EN55035

Software and Protocol Capability

1. Supporting software iM Connect

A web-based visualization protocol conversion configuration tool that does not require local software installation, allowing the browser to directly access the configuration gateway; Built in massive PLC driver library, one-stop completion of device data collection, protocol forwarding, and cloud docking.

2. Support PLC brand protocol

PLC from mainstream manufacturers such as Omron, Mitsubishi, Siemens, etc., compatible with 300+models of equipment.

3. Cloud uplink standard protocol

OPC UA、MQTT、RESTful API， Adapt to various industrial IoT cloud platforms and upper level SCADA systems.

Ordering Information

Standard model: GW-01 (PLC interconnect industrial IoT gateway), with optional expansion versions for memory/storage as needed.